EXFO ETS-1000G - Manual (Page 88)

BERT
78 ETS-1000G
ET The time that has elapsed since the beginning of the test.
RT The time that is left until the end of the test.
BITs The number of received bits.
EBITs The number of bit errors.
BER The number of bit errors divided by the total number of
received bits.
TX Err Number of manually injected errors.
LSS The time during which the loss of test sequence synchroni-
zation was observed.
%LSS The ratio of the time during which there was the loss of test
sequence synchronization to the time that has elapsed since
the beginning of the test (in percentage terms).
LOS The time during which there was no signal.
%LOS The ratio of the time during which there was no signal to
the time that has elapsed since the beginning of the test (in
percentage terms).
Setup Open the BERT Setup menu.