EXFO ETS-1000G - Manual (Page 44)

Preparing RFC 2544 for Analysis
34 ETS-1000G
Setting Test Parameters
Trial, s The period of time during which the test should be per-
formed for each frame size specified in the settings
(1-3600 s).
Rates (L1) Open the Rates (L1) menu.
Rate source
If the Throughput value is selected ( ), the Latency test
will be performed using the load value obtained as a result
of the Throughput test. If the Manually value is selected
( ), then user-defined values will be used for perform-
ing the test.