EXFO ETS-1000G - Manual (Page 168)

Remote Control Commands
158 ETS-1000G
Remote control commands (a console terminal)
show txgen header vlan count The number of VLAN tags.
show txgen header vlan [1-3] id The VLAN identifier value.
show txgen header vlan [1-3] priority The traffic priority value.
show txgen header mpls count Select the number of labels.
show txgen header mpls [1-3] label The label value.
show txgen header mpls [1-3] cos The Class of Service of a labeled packet.
show txgen header mpls [1-3 ttl The time-to-live of a labeled packet.
show txgen header autoarp Display whether the feature of submitting an
ARP request automatically is enabled or
disabled.
show txgen header diffserv Display whether the IP Precedence field and
the Type of Service field or the DSCP field are
selected.
show txgen header dscp The value of the DSCP field.
show txgen header precedence The frame priority value.
show txgen header tos The Type of Service of a packet.
show txgen port The port on which test traffic is to be
generated.
show txgen frame random min The minimum frame size value for the
uniform distribution law.
show txgen frame random max The maximum frame size value for the
uniform distribution law.
show txgen frame constant The frame sizes to be used for testing.
show txgen frame type Display whether a random frame size or a
fixed frame size is set.
show txgen duration The duration of test traffic generation.
show txgen rate The stated load, Kbps or %
Command Information to be output to the console