beautypg.com

22 event logging – EXFO ETS-1000G User Manual

Page 129

background image

10 Gigabit Ethernet Analyzer

119

22 Event Logging

The event logging system outputs messages about occurred events in the
Log menu, and also to the console terminal in case of establishing a
connection to the device through the USB interface or the remote control
over TELNET.

The events to be logged include:

Starting/stopping a test,

Enabling/disabling the Loopback mode,

A change in the connection state,

Using the device for remote testing,

Switching the device on/off,

A low battery charge level.

If any of the aforementioned event occur, a message of the following
format will be displayed on the console terminal/in the Log menu:

For example, when the Loopback mode is enabled for Layer 2, the
following message will be displayed on the console terminal:

By default the output of messages via the USB interface and TELNET is
disabled. The output of messages can be enabled/disabled using the
remote control command log on/off.