EXFO ETS-1000G - Manual (Page 149)

10 Gigabit Ethernet Analyzer 139
A Specifications
Interfaces
Testing
10G SFP+ 10GBASE-SR/SW, 10GBASE-LR/LW, 10GBASE-ER/EW
1G SFP 1000BASE-SX, 1000BASE-LX, 1000BASE-EX, 1000 BASE-T
RJ-45 10/100/1000 BASE-T
USB type B Control interface
LAN 10/100 Ethernet Control interface
Transmission rates 10 Mbps, 100 Mbps, 1Gbps, 10 Gbps
Supported frame
formats
Ethernet II, IPv4, UDP, TCP
Setting of frame
parameters
Source/destination MAC address, VLAN ID, VLAN priority,
source/destination IP address, ToS field, Precedence field, DSCP
field, source/destination UDP port, frame sizes from 64 to 64000
bytes
MPLS Up to 3 MPLS labels to be received and sent
VLAN Up to 3 VLAN labels
RFC 2544 Throughput, latency, frame loss, limit load
BERT Testing on the physical, data link, network and transport layers.
Ability of manually inject single-bit errors into the outgoing
traffic. Test results: BITs, EBITs, BER, LSS, %LSS, LOS, %LOS.
Support for the modes of random and fixed frame sizes. Test
sequences: CRTP, 2e11-1, 2e15-1,2e20-1, 2e23-1, 2e29-1, 2e31-1,
a user-defined test sequence (4 bytes)