EXFO ETS-1000G - Manual (Page 169)

Remote Control Commands
10 Gigabit Ethernet Analyzer 159
Remote control commands (a console terminal)
txgen start Start the generation of test traffic.
txgen stop Stop the generation of test traffic.
txgen results Results of generating test traffic.
Loopback
show loopback layer The loopback layer.
Network parameters
show network dhcp Display whether the DHCP feature is enabled
or disabled for port Test.
show network ip The IP address of port Test.
show network subnet The subnet mask for port Test.
show network gateway The gateway's IP address for port Test.
show network dns The IP address of the network node where
the DNS database resides for port Test.
show lan dhcp Display whether the DHCP feature is enabled
or disabled for the LAN port.
show lan ip The IP address of the LAN port.
show lan subnet The subnet mask for the LAN port.
show lan gateway The gateway's IP address for the LAN port.
show ifce mac The connection status.
Interface parameters. Port Test
show link The MAC address of port Test.
show ifce vlan count The number of VLAN tags.
show ifce vlan [1-3] id The VLAN identifier value.
show ifce vlan [1-3] priority The traffic priority value.
show ifce mpls tx lsr The IP address of the label-switching router's
interface.
Command Information to be output to the console