EXFO ETS-1000G - Manual (Page 53)

Analyzing RFC 2544
10 Gigabit Ethernet Analyzer 43
Back to Back Test Results
Back to Back Test Results
The table lists the load defined in the test settings and the time it takes the
device to process the limit load for each packet size. If the time during
which the device endures the maximum load cannot be determined, the
test status column will display Error and the Time, s column will be filled
with dashes.
It is possible to display the Frames column containing the number of
frames which have been transmitted during the test instead of the Time, s
column. To do so, press
(Frames).
The diagram shows a column for each configured frame size whose height
corresponds to the time during which the device endured the limit load.
The number of packets transmitted during the test is indicated on the
columns in the diagram.