EXFO ETS-1000G - Manual (Page 166)

Remote Control Commands
156 ETS-1000G
Remote control commands (a console terminal)
show bert header vlan [1-3] id The VLAN identifier value.
show bert header vlan [1-3] priority The traffic priority value.
show bert header mpls tx count Select the number of labels to be transmitted.
show bert header mpls tx [1-3] label The label value.
show bert header mpls tx [1-3] cos The Class of Service of a labeled packet.
show bert header mpls tx [1-3] ttl The time-to-live of a labeled packet.
show bert header autoarp Display whether the feature of submitting an
ARP request automatically is enabled or
disabled.
show bert header diffserv Display whether the IP Precedence field and
the Type of Service field or the DSCP field are
selected.
show bert header dscp The value of the DSCP field.
show bert header precedence The frame priority value.
show bert header tos The Type of Service of a packet.
show bert frame random min The minimum frame size value for the
uniform distribution law.
show bert frame random max The maximum frame size value for the
uniform distribution law.
show bert frame constant The frame sizes to be used for testing.
show bert frame type Display whether a random frame size or a
fixed frame size is set.
show bert level The OSI layer on which the test is to be
conducted.
show bert pattern A standard test sequence.
show bert user-pattern A user-defined test sequence.
Command Information to be output to the console