EXFO ETS-1000G - Manual (Page 43)

Preparing RFC 2544 for Analysis
10 Gigabit Ethernet Analyzer 33
Setting Test Parameters
Parameters of the Latency Test
Trial, s The period of time during which the test should be per-
formed for each frame size specified in the settings
(1-3600 s).
Resolution, % Resolution at which the throughput search should be per-
formed. Possible values: 10, 1, 0.1, 0.01, 0.001, 0.0001.
The minimum resolution value corresponds to the highest
accuracy of channel throughput measurement and the lon-
gest test duration.
Threshold, % Threshold of available loss (0-10%). If the quantity of
received packets is less than the quantity of transmitted
packets by the value of allowed loss threshold, the test will
be considered as completed.
Enabled Enabling/disabling the data deference analysis.
Trial qty The number of test reiterations for each defined frame size.