EXFO ETS-1000G - Manual (Page 165)

Remote Control Commands
10 Gigabit Ethernet Analyzer 155
Remote control commands (a console terminal)
show ctraf header mpls count Select the number of labels.
show ctraf header mpls [1-3] label s The label value.
how ctraf header mpls [1-3] cos The Class of Service of a labeled packet.
show ctraf header mpls [1-3] ttl The time-to-live of a labeled packet.
show ctraf header autoarp Display whether the feature of submitting an
ARP request automatically is enabled or
disabled.
show ctraf header diffserv Display whether the IP Precedence field and
the Type of Service field or the DSCP field are
selected.
show ctraf header dscp The value of the DSCP field.
show ctraf header precedence The frame priority value.
show ctraf header tos The Type of Service of a packet.
show ctraf rate The data rate value.
show ctraf frame The frame size.
ctraf start Start the generation of complex traffic.
ctraf stop Stop the generation of complex traffic.
ctraf results Results of generating complex traffic.
BERT
show bert header src mac The source MAC address.
show bert header src ip The source IP address.
show bert header src udp The source UDP port number.
show bert header dst mac The destination MAC address.
show bert header dst ip The destination IP address.
show bert header dst udp The destination UDP port number.
show bert header vlan count The number of VLAN tags.
Command Information to be output to the console