EXFO ETS-1000G - Manual (Page 154)

Reference Tables
144 ETS-1000G
Precedence Values
Precedence Values
ToS Values
Value Description Comments
0 Routine Normal priority
1 Priority Preferred priority
2 Immediate Immediate priority
3 Flash Expedited priority
4 Flash Override Emergency priority
5 CRITIC/ECP Critical priority
6 Internetwork Control Internetwork control
7 Network Control Network control
Value Description Comment
1000 Minimize delay To minimize the delay. It is used when he time
of packet delivery from the source network
device to the destination (latency period) is
most critical and has to be minimal.
0100 Maximize throughput Maximize throughput. It indicates that a packet
should be transferred through the channel with
the maximum throughput.
0010 Maximize reliability Maximize reliability. It is used when it is
important to make sure that data will reach the
destination without retransmission.
0001 Minimize monetary
cost
To minimize the cost. It is used when it is
necessary to minimize the data transmission
cost.
0000 All normal Normal service. In this case a packet is routed
according to a provider's decision.