EXFO ETS-1000G - Manual (Page 177)

Remote Control Commands
10 Gigabit Ethernet Analyzer 167
Remote control commands (TELNET). Configuration mode
bert rate Specify the required load.
bert duration hh.mm.ss Set the measurement duration.
Packet jitter
jitter txgen off / on Disable/enable the test traffic generator.
jitter threshold int Set the threshold jitter value.
jitter duration hh.mm.ss Set the jitter measurement duration.
Test traffic
txgen header mpls count off / 1 / 2 / 3 Select the number of labels.
txgen header mpls [1-3] label long Set the label value.
txgen header mpls [1-3] cos int Set the Class of Service of a packet.
txgen header mpls [1-3] ttl int Set the time-to-live of a labeled packet.
txgen header autoarp off / on Disable/enable the feature of submitting an
ARP request automatically.
txgen header diffserv prec+tos / dscp Select the IP Precedence field and the Type of
Service field or the DSCP field for inserting.
txgen header dscp text Set the value of the DSCP field, 8 bits.
txgen header src mac
XX:XX:XX:XX:XX:XX
Set the source MAC address.
txgen header src ip i.i.i.i Set the source IP address.
txgen header src udp int Set the source UDP port number.
txgen header dst mac
XX:XX:XX:XX:XX:XX
Set the destination MAC address.
txgen header dst ip i.i.i.i Set the destination IP address.
txgen header dst udp int Set the destination UDP port number.
txgen header vlan count off / 1 / 2 / 3 Set the number of VLAN tags.
txgen header vlan [1-3] id int Set the VLAN identifier value.
Command Action