EXFO ETS-1000G - Manual (Page 134)

Remote Control
124 ETS-1000G
Remote Control Through the WWW Interface
Remote Control Through the WWW Interface
The remote control feature allows viewing results and settings of main
tests and save them on a PC using a web browser.
To view test results and settings, it is necessary to:
1. Connect the device to a PC through test port or the LAN port.
2. Set up a network connection (refer to Network Parameters on
page 103).
3. Specify the IP address of the corresponding port in the address bar of
the web browser.
To save test results, it is necessary to:
1. Connect the device to a PC through test port or the LAN port.
2. Set up a network connection (refer to Network Parameters on
page 103).
3. Specify the IP address of the corresponding port in the address bar of
the web browser.
4. Select the delimiter:

comma

semicolon
5. Click the Download report link. The data will be saved to a .csv file.
Taking Screenshots
To take a screenshot of the device's screen, it is necessary to:
1. Connect the device to a PC through test port or the LAN port.
2. Set up a network connection (refer to Network Parameters on
page 103).