EXFO ETS-1000G - Manual (Page 162)

Remote Control Commands
152 ETS-1000G
Remote control commands (a console terminal)
show rfc2544 header dst mac The destination MAC address.
show rfc2544 header dst ip The destination IP address.
show rfc2544 header vlan count The number of VLAN tags.
show rfc2544 header vlan [1-3] id The VLAN identifier value.
show rfc2544 header vlan [1-3] priority The traffic priority value.
show rfc2544 header mpls count
Select the number of labels.
show rfc2544 header mpls [1-3] label The label value.
show rfc2544 header mpls [1-3] cos The Class of Service of a labeled packet.
show rfc2544 header mpls [1-3] ttl The time-to-live of a labeled packet.
show rfc2544 header autoarp Display whether the feature of submitting an
ARP request automatically is enabled or
disabled.
show rfc2544 header diffserv Display whether the IP Precedence field and
the Type of Service field or the DSCP field are
selected.
show rfc2544 header dscp The value of the DSCP field.
show rfc2544 header precedence The frame priority value.
show rfc2544 header tos The Type of Service of a packet.
show rfc2544 throughput duration The test duration for the throughput analysis,
s.
show rfc2544 throughput enabled Display whether the throughput
determination test is to be performed.
show rfc2544 throughput maxrate The load rate for the throughput analysis.
show rfc2544 throughput resolution The resolution value for the throughput
analysis.
show rfc2544 throughput threshold The loss threshold value for the throughput
analysis.
Command Information to be output to the console