EXFO ETS-1000G - Manual (Page 176)

Remote Control Commands
166 ETS-1000G
Remote control commands (TELNET). Configuration mode
bert header diffserv prec+tos / dscp Select the IP Precedence field and the Type of
Service field or the DSCP field for inserting.
bert header dscp text Set the value of the DSCP field, 8 bits.
bert header src mac
XX:XX:XX:XX:XX:XX
Set the source MAC address.
bert header src ip i.i.i.i Set the source IP address.
bert header src udp int Set the source UDP port number.
bert header dst mac
XX:XX:XX:XX:XX:XX
Set the destination MAC address.
bert header dst ip i.i.i.i Set the destination IP address.
bert header dst udp int Set the destination UDP port number.
bert header vlan count off / 1 / 2 / 3 The number of VLAN tags.
bert header vlan [1-3] id int Set the VLAN identifier value.
bert header vlan [1-3] priority int Set the traffic priority value.
bert header precedence int Set the frame priority value.
bert header tos text Set the Type of Service of a packet.
bert frame random min int Set the minimum frame size value for the
uniform distribution law.
bert frame random max int Set the maximum frame size value for the
uniform distribution law.
bert frame constant int Set the frame sizes to be used for testing.
bert frame type constant / random Select the frame size variation law.
bert level 1 / 2 / 3 / 4 Select the OSI layer on which the test is to be
conducted.
bert pattern user / crtp / 2e11-1 / 2e15-1
/ 2e20-1 / 2e23-1 / 2e29-1 / 2e31-1
Select a standard test sequence or a user-de
fined test sequence.
bert user-pattern hex Specify the user-defined sequence.
Command Action