EXFO ETS-1000G User Manual
Page 13
Introducing the ETS-1000G
10 Gigabit Ethernet Analyzer
3
Scope of use
Testing in compliance with RFC 2544:
throughput,
latency,
frame loss rate,
limit load.
Measurement of the bit error rate (BERT) on the physical layer, the data
link layer, the network layer and the transport layer using standard and
user-defined sequences.
Support for Q-in-Q (VLAN Stacking): double encapsulation with an
option to insert up to 3 VLAN tags. An option to set a VLAN priority, a
VLAN ID.
Support for multi-protocol label switching: an option to insert up to 3
MPLS labels.
Setting up a loopback on the physical, data link, network and transport
layers.
Intelligent device search mode: detecting other ETS-1000G devices in
the network and subsequently enabling the Loopback mode on them
for the data link, network or transport layer using the OAM protocol.
Generating and analyzing several data streams to check the operability
and the Quality of Service (QoS) of different services.
Managing the device over TELNET.
Displaying test results through the WWW interface.
Packet jitter measurement.
Gathering and displaying statistics of the traffic being received and
transmitted on the physical, data link and network layers in
compliance with RFC 2819[4].