beautypg.com

EXFO ETS-1000G User Manual

Page 58

background image

Asymmetric Test

48

ETS-1000G

Testing Example

5. On the local device switch to the BERT > Setup > Header menu.

Set:

Src MAC - MAC 1

Dst MAC - MAC R1

Src IP - IP 1

Dst IP - IP 2

Note: To get gateway MAC address it is necessary to submit an ARP request:

switch to the Dst MAC menu item and press

button.

According to the section BERT on page 77 on the local device it is
necessary to perform BER test settings. Then switch to the BERT menu and
press (Start)

button.

Note: After pressing the Start button the following messages can be displayed on

the screen of the local device:

Connecting to remote port... — occurs immediately after the test start.

No route to host — occurs if the local device is unable to connect to the
remote device.

Connection is lost — occurs if the remote device is not responding
after the connection is established.