Maytag Atlantis - Manual (Page 94)

Spin During Agitation WILL THE MOTOR RUN? NO
Check for thrust bearing misalignment
(Page 7-6).
Check for defective brake package
(Page 7-7).
Check for misalignment of snubber
(Page 7-8).
Will Not Spin - Spin Speed Too Slow
• Check power supply to the machine
(Page 1-2).
• Check lid switch assembly (Page 8-19).
• Check selector option switch (Page 8-17).
• Check timer contacts (Page 8-2).
• Check for pump obstruction (Page 5-5).
• Check motor (Page 8-11).
WILL THE MOTOR RUN? YES-
Check for unbalanced load.
Check for broken or slipping belt.
Does the house drain system accept wa­
ter from machine?
Check for blocked drain hose.
Check for binding tub seal (Page 7-3).
Check for partial engagement of brake as­
sembly (Page 7-13).
Check for obstruction between tubs
(Page 5-5).
Check for proper adjustment on thrust
bearing (Page 7-4).
Check for broken impeller on pump
(Page 5-4).
Complete torque test (Page 7-12).
If machine appears to pass all checks, place
3 1/2 pound unbalance weight in machine
and check for 600 RPM. Monitor wattage
readings (Page 1-8).
Clothes Wet After Spin
• Review section titled "Spin Speed Too
Slow."
• Check for unbalanced load.
• Check for slipping belt.
• Check reference marks on drive pulley and
cams (Page 7-6).
• Check for partial engagement of brake as­
sembly (Page 7-13).
• Check pump for obstruction (Page 5-5).
• Check for drain hose restriction.
• Check for drain plumbing restriction.
16009485-01 Section 9. Electrical Schematic
9-4
©1999 Maytag Appliances Sales Company