Top cover to cabinet hinge – Maytag Atlantis User Manual

Page 40

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

TOP COVER TO CABINET HINGE

Some models will have a plastic hinge
assembly holding the main top to the
cabinet. (Figure 4-1)

The hinge assembly is removed from the

unit by lifting the main top about 2 inches
and sliding it forward. The hinge is then
removed by pushing up and out on the
lower tab and lifting the hinge up to
release it from the cabinet. (Figure 4-2)

Figure 4-1

Lift up and push out on hinge tab to
release hinge from cabinet

Figure 4-2

16010280
(16009485-02)

SECTION 4, Cabinet Assembly Components

4-12