Electrical test equipment, Electrical test equipment -1 – Maytag Atlantis User Manual
Page 71
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 8. ELECTRICAL COMPONENTS & TESTING
ELECTRICAL TEST EQUIPMENT
The equipment required to service Maytag
products depends largely upon the conditions
you encounter. Locating a malfunction will
often require the use of electrical testing
equipment such as:
Description
Part Number
Analog Test Meter
20000005
Digital Test Meter
20001001
Clamp-on Ammeter
20000002
AC Voltage Sensor
20000081
Analog Test Meter
can be used to check for
open or closed circuits,
measure resistance, AC
and DC volts, and
temperature.
Clamp-On Ammeter
can be used to detect
shorts. Overloads on
the circuit
breaker or fuse
can be traced
to either the
washer or circuit
breaker by check
ing the washer
current draw.
Digital Test Meter
can be used to check for
open or closed circuits,
measure resistance,
AC and DC volts, and
temperature.
W
AC Voltage Sensor
can be used to alert you if
AC voltage is present so proper
safety precautions can be observed.
The tip of the sensor will glow bright
red if voltage is between 110-600
volts AC.
16009485-01
©1999 Maytag Appliances Sales Company
Section 8. Electrical Components & Testing
8-1