Maytag Atlantis - Manual (Page 31)

AUTOMATIC TEMPERATURE
CONTROL BOARD
REMOVAL
1. Disengage the console assembly from the
top cover and roll forward (See Console
Removal).
2. Remove wire harness from control board.
3. Squeeze the locking tabs together
(Figure 4-9).
4. Slide the control board and bracket away
from the timer motor to unhook the bracket
from the timer rear face plate. Mounting
hooks on the bracket engage with the edge
of the timer rear face plate.
FOR ALL MAV8500 MODELS
1. Remove board mounting screw, and
bracket mounting screw.
2. See Figure 4-8 for additional assistance.
16009485-01 Section 4. Cabinet Assembly Components 4-3
©1999 Maytag Appliances Sales Company