Maytag Atlantis - Manual (Page 48)

The water valve is held to the cabinet by one
screw. (Figure 5-4)
Figure 5-4
Remove the screw and swing the bracket
and valve assembly to the right to release
the bracket from the cabinet. (Figure 5-5)
The fill hoses can be removed at this point.
Figure 5-5
Figure 5-6
BE SURE THE WATER IS TURNED OFF.
(Figure 5-7)
The water valve is held to the bracket by one
screw and a tab molded into the plastic part
of the bracket. (Figure 5-8)
Figure 5-7
Remove the wiring from the water valve.
(Figure 5-6)
Remove the screw and using a small flat
bladed screw driver, carefully pry up on the
plastic tab to release the water valve from
the bracket. (Figure 5-9)
Figure 5-8
Figure 5-9
16010280
(16009485-02) SECTION 5. Water - Related Components
©2000 Maytag Appliances Sales Company
5-8