Maytag Atlantis - Manual (Page 14)

• Turn off hot and cold water faucets.
• Disconnect both water inlet hoses at the
faucets. Lower them to the floor.
• With the service cord connected to the
electrical outlet, rotate the timer to the
normal start or fill position and pull timer
knob to start washer. Turn water tempera­
ture selector switch to warm.
• When water stops draining from the hoses,
disconnect service cord.
• Lower the drain hose to the floor and al­
low it to drain into a floor drain or shallow
pan.
In below-freezing temperatures, ice may form
in the "fill" flume and the pump. Raise the room
temperature and allow time for the ice to melt
before using the washer.
16009485-01
©1999 Maytag Appliances Sales Company
Section 1. General Information 1-6