Maytag Atlantis - Manual (Page 77)

faucet option will function. When the pressure
switch is satisfied, the faucet will no longer
function.
End of Cycle Signal
The signal will sound at the end of the final rinse.
Note, the signal will not sound for 150 seconds
into the cam closure. Software built into the
board enables the board to perform this func­
tion. The washer will continue to spin for 15-20
seconds at the end of the signal. On Model
MAV8500 only, the reminder chime will sound
repetitively every four minutes. This will con­
tinue until the timer knob is depressed, the re­
minder chime option switch is deselected or the
water fill level is increased.
Signal intensity is controlled by the user us­
ing a rocker switch on the control console.
The rocker switch can be checked at the
temperature control board terminal con­
nector (Figure 8-6) using the following
chart, along with other machine functions
(Figure 8-7).
TEMPERATURE CONTROL CONNECTOR
BU OR GY GY PK BU PU BR PU RD OR YL PU RD YL BU OR
PUX
WH
11 13 47 47 4 25 51 3 27 26 29 LI 35 37 39 7N
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
MRBiNUIRICNtW
Figure 8-6
16009485-01
©1999 Maytag Appliances Sales Company
Section 8. Electrical Components & Testing
8-7