Maytag Atlantis User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Figure 4-13

Warning: The spring in the valve assembly

is compressed and may fly out of the dis

penser. Depressing the plunger button

during dip removal will prevent this from
occurring.

TORSION ROD ASSEMBLY

The torsion rod assembly acts as a counter

balance when liquid detergent is in the dis
penser. This allows for easier opening and
closing of the washer lid.

REMOVAL

1. Lift the washer lid and remove the deter

gent reservoir.

2. Remove the center support from the tor

sion rod by rolling the support toward you.

Slide the left retainer toward the center of

the lid and remove from behind the lid
flange (Figure 4-15).

With the left retainer removed, grasp the

lid vertically and rotate the torsion rod in
a clockwise direction away from the right
hand plastic bushing in the top cover.

DETERGENT DISPENSING

Figure 4-16

1. After initially filling the reservoir of the dis

penser, lower the lid to fill the dispensing
chamber on the left side of the dispenser.

16009485-01

Section 4. Cabinet Assembly Components

4_0