Potter PFC-4410RC - Manual (Page 98)

98
PFC-4410RC • 5403550 • REV Q • 11/12
CA2Z
CLASS A INITIATING
DEVICE MODULE
MFG. #5401025 - REV F
8/06
PRINTED IN USA PAGE 1 OF 1
SUPERVISORY
SUP SUP ZONE 1 ZONE 2 ZONE 3 ZONE 4
CA2Z
MODULE
NO. 2
(IF USED)
CA2Z
MODULE
NO. 1
J2 J2
DWG# 3527-11
PFC-4410RC
PC BOARD
CA2Z CA2Z
ZONE 1 ZONE 2 ZONE 3 ZONE 4
The Model CA2Z Class A Module is designed to be used with the PFC-
4410RC Fire Control Releasing Panel to convert from two (Class B)
initiating device circuits to two (Class A) circuits.
UL Listed: Option for use with the PFC-4410RC Series
Transient Protected
Built In 5.1k End Of Line Resistor
PC Board Assembly: Mounts to PFC-4410RC Panel stand-offs
Stock No. 3006013
Potter Electric Signal Company, LLC • St. Louis, MO • Cust Service: 866-572-3005 • Tech Support: 866-956-0988 • Canada 888-882-1833 • www.pottersignal.com
The module is to be mounted in the upper right hand corner of the panel.
Connection to the panel is made via the 8 pin header mounted on the
back side of the CA2Z.
Mounting Typical Wiring