Potter PFC-4410RC - Manual (Page 96)

96
PFC-4410RC • 5403550 • REV Q • 11/12
Annex B: Product Datasheets of Optional Equipment
18” WIRE LEADS
FURNISHED FOR
RELAY COIL
* NUMBERS REFER TO
SOCKET TERMINALS
NOT RELAY PINS.
RELAY SHOWN DE-ENERGIZED
RED
BLACK
14
13
1*
9*
5*
2*
10*
6*
3*
11
7*
4*
12*
8*
DWG# 1134-1
MAIN PC BOARD MODULE
ARM-1 RELAYS
Wiring Placement In PFC-4410RC Series Control Unit
Stock number: 3004726
UL Listed: For use with the PFC-4410RC Series
Dimensions: 3 1/4" X 3 1/4" X 4"
Weight: .315 lb.
Assembly: Socketed relay in plastic mounting track
Power Requirements: 40mA at 24VDC
Contact Ratings:
Each relay has 4PDT contacts,
Rated at 10 amps resistive,
24VDC
When the ARM-1 is used the additional power required for this relay
module must be subtracted from the total circuit current available.
The ARM-1 Auxiliary Relay Module is a non-supervised 4PDT Relay
CONNECT ARM-1 TO
OUTPUT CIRCUIT
RED
BLACK
PFC-4410RC OUTPUT TERMINALS
DWG# 1134-2
1*
9*
5*
2*
10*
6*
3*
11*
7*
4*
12*
8*
All relays shown in non-activated condition
ARM-1/PFC-4410RC Installation Hook-Up Diagram
Notes:
1. * Numbers refer to socket terminals not relay pins.
2. Auxiliary relay operation is determined by programming of the PFC-4410RC panel. Consult the appropriate manual for further information.
designed to be activated by 24VDC Indicating and/or Releasing,
polarity reversing circuits. The module can be used for fan shutdown,
door release, elevator recall, etc.
ARM-1
AUXILIARY RELAY MODULE
MFG. #5401134 - REV E
9/08
PAGE 1 OF 1 PRINTED IN USA
Potter Electric Signal Company, LLC • St. Louis, MO • Cust Service: 866-572-3005 • Tech Support: 866-956-0988 • Canada 888-882-1833 • www.pottersignal.com