Potter PFC-4410RC - Manual (Page 82)

82
PFC-4410RC • 5403550 • REV Q • 11/12
SET Press the top button to scroll through the character set in one direction.
SELECT Press the middle button to scroll in the opposite direction.
FUNCTION Press the bottom button to enter the character displayed and to move to the next position.
After programming the top line (maximum 10 characters), continue this process for the bottom line and the initiating zones. To
keep the initiating zones as “ZONE 1”, etc., press the bottom button when they are displayed.
When finished with the last zone, the following will appear in the display window:
This allows the user to change the password. All panels are shipped from the factory with a password of 000.
SET Press the top button to set the displayed number and move to the next space.
SELECT Press the middle button to scroll through the numbers.
FUNCTION Press the bottom button to skip this function.
When finished with this section, the following will appear in the display window:
Quit by returning the programming switch to the left position. The panel is now ready for operation.
Programming Summary
• Examine History Buffer
• Set Time
• Enter Password
• Enable/Disable Initiating Zones
• Enable/Disable Output Zones
• System Mode - Normal/One Man Walktest
• Select Program - #0 thru #25
N E W P A S S W O R D = 0 0 0
^
P U S H P R O G R A M M I N G
S W I T C H B A C K U P
To change the banner message, press the top or middle buttons. If you don’t want to change the banner message press the bottom
button.
If the top or middle button was pressed, the following will appear in the display window:
The “^” is pointing to the first character on the top line. Press the top button to scroll one direction through the character set, or
press the middle button to scroll the other direction. The entire alphabet, numbers and punctuation are included.
^