EVCO EVCLC33DJ2 User Manual
Page 37
EVCO S.p.A.
Vcolor 338 L | Installer manual ver. 2.0 | Code 144VC338LE204
page 37 of 66
12.3
Enabling
the
"Weekly
programmed
switch-on"
function
Operate as follows to access the procedure:
1.
Ensure that at least one switch-on is set, that the
device is on and that no other procedure is in
progress.
2.
Touch
for 1 s.
Operate as follows to select a switch-on:
3.
Touch
or
.
Operate as follows to modify a switch-on:
4.
Repeat. Points from 3 to 11 of paragraph 12.2
“Setting the "weekly programmed switch-on"
function”.
Operate as follows to activate the function:
5.
Touch
.
Operate as follows to deactivate the function:
6.
Touch
before point 4.
Access to the function activation procedure
“Weekly programmed switch-on”.
Selection of a switch-on and activation of the function
“Weekly programmed switch-on”.