EVCO EVCLC33DJ2 - Manual (Page 36)

EVCO S.p.A. Vcolor 338 L | Installer manual ver. 2.0 | Code 144VC338LE204
page 36 of 66
12 "WEEKLY PROGRAMMED
SWITCH-ON" FUNCTION
12.1 Preliminary notes
The “Weekly programmed switch-on” function allows to
program up to a maximum of 9 weekly switch-ons of the
device and simultaneously start a recipe; see chapter 9 ““MY
COOKBOOK” FUNCTION”.
12.2 Setting the "weekly
programmed switch-on"
function
Operate as follows to access the procedure:
1. Ensure that at least one recipe is memorised, that
the device is on and that no other procedure is in
progress.
2. Touch the key .
Operate as follows to set the switch-on day:
3. Touch .
The "Scheduling" screen will be displayed, and from there it is
possible to proceed with the settings.
4. Touch or (within 15 s) to reduce or
increase the relevant value.
5. Touch the key to confirm the input value.
Operate as follows to set the switch-on time:
6. Touch .
7. To set the time, touch or (within 15 s)
to reduce or increase the relevant value.
8. To set the minutes, touch the display near the
centre, , touch or (within 15 s) to
reduce or increase the relevant value.
9. Touch the key to confirm the input
value.
To select the recipe to be launched, from the main screen
proceed as follows:
10. Touch the "Recipes" key .
11. Repeat item 3. ... 5. of paragraph 9.3 “Starting a
recipe”.
Access to the setting procedure of the function
Setting the start time and the functions time