EVCO EVCLC33DJ2 - Manual (Page 27)

EVCO S.p.A. Vcolor 338 L | Installer manual ver. 2.0 | Code 144VC338LE204
page 27 of 66
7 USER INTERFACE
7.1 Switching the device on/off
Operate as follows to switch the device on:
1. Touch .
Operate as follows to switch the device off:
2. Make sure no procedures are in progress.
3. Touch .
If there is a power cut when the device is on or off, when the
power supply is restored the device will back to the prior
status.
If there is a power cut during the cooking cycle and the
duration of said interruption is lower than the time established
with parameter r12, when the power supply is restored, the
cycle will be re-proposed from the start of the phase during
which the power cut occurred (if the duration of the
interruption is longer than the time established with parameter
r12, when the power supply is restored, the cycle will be
interrupted).
7.2 Silencing the buzzer
Operate as follows to silence the buzzer:
1. Make sure no procedures are in progress.
2. Touch a sensitive area of the display.
Device switch-on.
Device switch-off.