Kenwood KRF-V8881 D - Manual (Page 60)

VR-20g0/VR-30a0/KRF-V88ei0/KRF-V7771D [En/K]
Dolby 3 Stereo
Dolby 3 Stereo is available for systems that do not have surround speakers.
When in the Dolby 3 Stereo mode the surround information is redirected to
the front left and right speakers. This mode is designed for usa with Dolby
Surround program sources, but can also improve sound field unity for
programs that are not Dolby Surround encoded. Dialog positioning and sound
image definition, however, may not be as accurate when used with programs
that are not Dolby Surround encoded
DSP mode
The DSP mode lets you add the atmosphere of an arena, jazz club or stedium
from a PCM or analog input source. * These modes are panicularly effective
when used with stereo program sources, like CD, television, and FM radio.
You might enjoy trying the STADIUM or ARENA mode the next time you
watch a concert or sporting event!
The WALL parameter lets you adjust the "brightness" of the sonic environ­
ment according to your preference.
The ROOM SIZE parameter lets you adjust the size of the sonic environment
according to your preference.
The EFFECT level lets you adjust the "presence" of the some environment
according to yOur praference
* The DSP mode will produce a stereo-like surround effect from monaura
sources, but there will be some reduction in the presence of the arena, jazz
club, or stadium (etc.).
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic” and the double-D symbol are trademarks of
Dolby Laboratories. Confidential Unpublished Works.
©1992-1997 Dolby Laboratories. All rights reserved. Manufactured under license from DTS, Inc,
"DTS", "digital surround", and "coherent acous­
tics" are trademarks of DTS, Inc.
© 1997 DTS, Inc. All rights reserved.
D I G ! T A L
clÉS
S U R R O U N D
Recommended speaker installation
4
It is recommended that the surround Speakers are installed straight to the left and right of the listening position or slightly behind, at a height
of about 1 meter higher than the listener's ears.
See your retailer, or instaiiation varies by room shape, size and personal preference.
What is DSP?
The DSP stands for Digital Signal Processor, in the DSP presence mode, the reverberation cornponents ielemenis of sound echoed in
various spaces) which determine the feeling of presence are created by digital processing by the DSP without spoiling the sound quality
of the original music source.