Kenwood KRF-V8881 D - Manual (Page 42)

Single CD remote control
• It IS necessary to assign the CD player input previously.
JO Select the "CD1" icon.
• The "CD1" input is selected.
□ Select the icon to be controlled.
f t>yB
C
Example of menu
)iiH3aca0g)( ^ screen ;
0®S When the system setup
Í Mode code is input
El Perform operation in the "CD Mode" menu screen.
[ Random j
['.. Rgpeat... i
[ Time
Remote control of non-KENWOOD CD player
• It IS necessary to assign the CD player input previously.
JO Select the "CD 1" icon.
m The "GDI" input is selected.
iS Select the icon to be controlled.
CQCZ3CM)C^)(3ti)@]l
f O I
©®1'
ragirggifgji disc
I Pwr If............Mode'"igiPTdj
El Select the icon to be controlled in the “CD Mode'
menu screen.
Random 1
-f Reoeat >
t Tlrtna 1
VR.aQ9D/VR-20G0/KRf-V8aai D/KRF-V7771D (En/K]
Carrousel CD remote control
• it is necessary to assign the CD player input previously.
B Select the "CDI " icon.
• The "CD!" input is selected
B Select the icon to be controlled.
[ í>yÍ30 1(' kw irgp¥>ftlf?IÍ3f
[ □ i'fcií^lirJMti-ifflfsíísl
rggirgFM Pise IgiWmfitial
'■ ' 1.Wode.....
Example of menu
screen :
When the system setup
code Is input
El Perform operation in the "CD Mode " menu screen.
f Video CP ] [............. Random j
■ ' ■ {....iRepeat..... |j
□ Perform operation in the "Video CD {CD}" menu
screen.
i>M
Prev. Next
I Retorrt
I
Se lect I f P a ' l 7 n T5C^
• To play a Video CD compatible CD player and outputs its
video, connect its video and audio outputs to one of the
sets of input jacks VIDEOI to VIDE04,
• When using a Video-CD player, rennove the system
control cord from the CD player.
tv,*, nr:
Controffing a Multi-room capability CD Pfuyer _______
Control horn ''Boom A "
To control such a CO ptayer from "Room A"< set "Zone Select" to "Room A" eod select the-
‘XD1" icon. ' CD2" cannot be controlled while "Room A" is set.
Control from ‘'Boom 0*'
To control such a CD player from "Room B", set "Zone Select" to "Hoorn B” and select the
"CD2" icon. "CDI" cannot be controlled while "Room B" is set,
• When "Room B" i$ set, the fixed segment icons that
cen be selected are limited,
Controlling other CD players than the Multi-room capability CD Player (When
2
players are connected)
When a KENWOOD CD player and a non-KENWOOD CD player or two CD players from non-KENWOOD manufacturers are connected.
Control from “Room A"
To control from "Boot« A", set 'Zorre Select" to “Room A" and select the "CD1" or "CD2/
TspeZ" icon.
Control from “Room B"
To control from "Room B", sat “Zone select" to "Room B" arid select the "CDI" icon (i.e,
the CD player connected to the "CD1" input!.
1 When "Room B" is set, the fixed segment ¡cons that
can deselected are limited. The CD player connected to
the "CD2/Tape" input cannot be used in "Room B".
u,> JCTUd-Jrrcx.
Controlling other CD players than the Multi-room capability CD Player men one co player is connected)
Control from "Room A"
To control such a CD player from "Room A", set "Zone Select" to "Room A" and select the
"CDI" icon.
Control from “Room B"
To control such a CD player from "Room 3", set "Zone Select" to "Room B" and select the
"CD1" icon.
I When "Room B” is .set, the fixed segment icons that
can be selected are limited.