Kenwood KRF-V5560D User Manual
Kenwood
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
KENWOOD
AUDIO VIDEO SURROUND RECEIVER
VR-605
VR-615
KRF-V5060D
KRF-V4060D
KRF-V5560D
INSTRUCTION MANUAL
KENWOOD CORPORATION
This instruction manual is for some models. Model availability and features
(functions) may differ depending on the country and sales area.
About the supplied remote control
Compared to standard remote controls, the remote control supplied with this receiver has several
operation modes. These modes enable the remote control to control other audio/video components. In
order to effectively use the remote control it is important to read the operating instructions and obtain a
proper understanding of the remote control and how to switch its operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the operation
modes may result in incorrect operations.
B60-5197-20 02 ■ JDj (K, P, T, M, Y, X, E2) [
kw
: 0109
Document Outline
- KENWOOD
- AUDIO VIDEO SURROUND RECEIVER
- Before applying the power
- Names and functions of parts
- Setting up the system
- Analog connections
- Microcomputer malfunction
- Connecting audio components
- Connecting video components
- Digital connections
- Connecting a DVD player (6-channel input) (For vr-bis/krf-vsobod only}
- Connecting the speakers
- Connecting the antennas
- Preparing the remote control
- Preparing for surround sound
- 1 SP SETUP
- Q Use the MULTI CONTROL knob or keys to select the appropriate subwoofer setting.
- © Use the MULTI CONTROL knob or keys to select the appropriate front speakers setting.
- © Press the SET UP key to accept the setting.
- © Use the MULTI CONTROL knob or keys to select the appropriate center speaker setting.
- if you selected "LRG" as the front speakers setting,
- If you selected "NML" as the front speakers setting,
- © Press the SET UP key again to accept the setting.
- © Use the MULTI CONTROL knob or keys appropriate surround speaker setting.
- to select the
- If you selected "LRG" as the center speaker setting,
- 17 EN
- Normal playback
- Listening to a source component
- Turning on the receiver
- Selecting the input mode
- Selecting MD/TAPE
- O Use the INPUT SELECTOR knob or keys to select the source you want to listen to.
- B Start playback from tbe selected source.
- El Use tbe VOLUME CONTROL knob or VOLUME keys to adjust the volume.
- Normal playback
- SPEAKERS ON/OFF VOLUME CONTROL
- BASS BOOST- MUTE■
- LOUDNESS
- MULTI
- CONTROL
- CINEMA EQ
- TONE
- VOLUME
- Listening to a source component
- Recording
- Listening to radio broadcasts
- Tuning (non-RDS) radio stations
- D Use the INPUT SELECTOR knob or TUNER key to select the tuner.
- B Use the BAND key to select the desired broadcast band.
- El Use the AUTO key to select the desired tuning method.
- (For the U.K. and Europe only)
- BUse the MULTI CONTROL knob or keys, or TUNING / ►► keys to select the station.
- D Tune to the station you want to store.
- Ш Press the MEMORY key while receiving the station.
- Ei Use the MULTI CONTROL knob to select one of the station presets (1 - 40).
- Q Press the MEMORY key again to confirm the setting.
- S Enter the number of the preset station you want to receive (up to “40").
- Receiving preset stations in order (p.call)
- O Press the TUNER key to select tuner as the source.
- S Use the P.CALL l~«^/►►l key to select the desired station.
- D Press the TUNER key to select tuner as the source.
- (For the U.K. and Europe ordy)
- Pressing the RDS DISPLA Y key changes the contents of the display.
- (For the U.K. and Europe only)
- O Use the INPUT SELECTOR knob to select the tuner.
- B Use the BAND key to set the broadcast band to “FM".
- B Press and hold the MEMORY key for more than 2 seconds.
- (For the U.K. and Europe only)
- Tuning by Program TYpe (PTY search)
- Tuning (non-RDS) radio stations
- Ambience effects
- Surround modes
- Surround play
- When the DOLBY DIGITAL signal is input:
- Preparations
- O Start playing the video software.
- B Press the LISTEN MODE key to select the listening mode.
- When the DTS signal is input:
- When the analog signal or the digital signal (except for DOLBY DIGITAL or DTS signal) is input:
- B Adjust the volume. * •
- DVD 6-channel playback iFor vr-bi5/krf-v5060d only)
- Adjusting the sound
- Preparations
- OSelect "DVD/6CH" as the input source.
- Ш Select "6CHINPT" by pressing the INPUT MODE key.
- Q Start playback of the DVD software.
- OAdjust the volume.
- Midnight mode (Dolby Digital mode only)
- Panorama mode (Pro Logic II Music mode only)
- Subwoofer adjustment
- Dimension mode (Pro Logic II Music mode oniy)
- Center Width mode (Pro Logic II Music mode oniy)
- Display dimmer adjustment
- 96kHz LPCM playback
- Basic remote control operations for other components
- In case of difficulty
- IMPORTANT SAFEGUARDS