Kenwood KRF-V8881 D - Manual (Page 35)

.V C-V ®sfe:=sSbi'ie;
VR-2QSD/VP-2QaO/KP?F-V8aa 10/KRF-V77710 [Еп/К]
Operation in the "Custom 0 Edit: VCR" screen.
Custom 1 EditiVCR
^Pwrll
Hn'll
Pwr : Power
Ply : Play Input Select it
[Channel Code 1@
( Channel
• The output timing of each code can be switched as shown below.
_ .. .<—» Os —>• Is ■•—► 2s -<—►.......— 15s
-" indicates that no code is output and "Os" indicates that the
code IS output at the same time as a macro execute key is pressed.
• The component name after "Edit: " is switched to "VCR",
"DSS", "Cable”, "Satellite”. "LD", "DVD", "CD". "MD" or
"Tape" according to the selected input.
• Check the operation after setting the tinne. If macro play does пот
occur, increase the time settings with the following procedure.
О Set the "Pwr" (Power) on time.
Select with the "Q)"or "© " icon.
• Select the "Pwr" icon and check operation.
© Set the "Ply" (Play! start time.
Select with the "or " icon.
• Select the "p|y* jeon and check operation.
® Set the "Input Sefect" code output timing of the VCR.
Select with the "or "(0 " icon.
• Select the "input Select" ¡con and check operation.
О Open the "lOkey Pad" menu screen to select a channel.
Select "Channel" icon.
• Set as descfibect in step 0.
О Set the "Channel Code" output timing of the VCR.
Select with the "Qj "or "(щ " icon. ,
• Select the "Channel Code" ¡con and check operation.
Operation in the "Wkey Pad (Macro}"screen.
■ ||1УЛ11:Л;П¥ГШЯтарИМ^
."Pr^ir
0Ш©©©'
e^0fe)0fo
IГх71! cir |Г еп 1 г 11+1 old+1 oo I
Clr ¡Clear
Entr ¡Enter
3 ^ :The number of input
Icons is shown in max.
10 digits.
Clr
Entr
>12
Select to clear all the input "j(c"
Select when it is required to enter a value selection.
Select when inputting a channel value of 13 or more.
Select to switch between the 1-digit input or 2-digit
input.
* To output a set charmel cods, select the "Channel Code" icon In
step 0,
O Set a channel.
(Example)
To set CH 11 ; Select the "+10" then "1" icons.
© Select the " [✓ ) establish the selection.
When " (2) ” is selected, the screen returns to the previous
Custom 1 Edit 1: ACC
Ж|43?5>''' 'T t‘Ski*»cift>i*4.--S&oa,b
Perform selection in the "Macro Edit: Custom 1.2 or 3" menu screen.
O Set the "Accessories" (power) ON timing.
Select with the "(^ "or "O " icon.
Custom 1 Edit 1: TV
■ «тоaLlOlasvi4*^т■-iг^ai^aчtв^*вie^»■ic i8!ivcactiesu*j:aitBj*0«5i!iBe
Perform selection in the "Macro Edit: Custom 1,2 or 3" menu screen.
Pwr : Power
г Video Select
TV Select )(^рПЯШ>1'Т
■•Ч.
Pwr ¡Setting of the TV's "Pwr" code output timing.
TV ¡Selection of the controlled TV from "TV1" and
"TV2".
Video Select ¡Selection of the TV's "Video Select" code output
timing.
TV Select ¡Selection of the TV's "TV Select" code output
timing.
• Check the operation after setting the tirna, If macro play does not
occur, increase the time settings with the following procedure.
О Set the “Pwr" (power) ON time.
Select with the "Q]|"or " icon.
■ Select the "Pwr" icon and check operation.
® Select whether "TV1" or "TV2" is to be controlled.
© Set the "Video Select" code output timing.
Select with the "(З) "or "© ” icon.
• Select the "Video Select" icon and check operation.
© Set the “TV Select" code output timing.
Select with the "or "(y " icon.
• Select the "TV Select" icon and check operation.