Kenwood KRF-V8881 D - Manual (Page 34)

vR-20sa/vR.2osD/KRF-veae i d / krf - v /?? i d (Е п / к )
General setup flow
□ Selecting the "Main Menu" icon and opening the "Setup"
menu
O Selecting the "Macro" icon
B Selecting the input to be played
□ Selection in the "Macro Edit: Custom 1" screen
0 Setting the target component In the "Edit" menu
0 Setting the channel, etc.
The macro play function allows you to set the remote to
control several components in succession. After completing
this setup, you can perform a series of operations automati­
cally, Enter the setup codes for the components you want to
control beforehand.
Select the “Main Menu" icon from the fixed segments.
Э Й Й B. C-
fis S о Select the Select "Stp" icon.
Й Ш S, Ш S s M H Э
J
Select the “Macro"icon.
t-eri ISh'ctf Fn c!
{ Surrourtd У Input
,f Bot^riloaid WMMiti
Perform operation in the "Custom 1", “Csiom2”or "Cstom 3“ screen.
i Example when the
"VCR" is assigned to
" Video 1"
• Three kinds of macros, "Custom 1", "Custom 2" and "Custom 3"
can be set and registered.
О Select the input to be played with the"@) "or "IQ " icon.
Each selection of the Icon switches the inputs as follows.
- VIDE01 <—* VIDE02 »—f VIDEOS > VIDE04 —*CD1
«MD/Tape1 -r­
B Select the "Edit" icon.
• The "Edit" menu is no? displayed if none of the connected
components has been assigned to "Video!"
Perform operation in the “Macro Edit: Custom 1“ screen.
Macro Edit:Custom 1 O To setthetimiog of the component selected in stepB above,
select the icon corresponding to the component.
• Device : Set up the connected devices,
• Accessories : To .set KENWOOD accessories.
• TV
: The icon shown in the example on the left opens
the TV setup,
• The displayed menu screen is variable depending on the Model
Type setup