Setup of room a and room b, Perform icon selection in the "setup" menu, Perform setup – Kenwood KRF-V8881 D User Manual
Page 24: Setup of room a and room 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tarmimi
Setup of Room A and Room B
VR-2030/VR-2080/KaF-V88B10/KRF-V7771ü (£r»/Kj
To control the system components in "Room A" from "Room
B", it Is first required to set the IR RECEIVER to "Room B".
After this, perform the IR RECEIVER setup using the main
unit keys as described in "Switching the IR RECEIVER mode".
Then, perform the required setups for the remote control
unit using its "Setup IVIulti Room" menu as described below.
After the "Room B" operation has been set, the audio for
"Room B" is output from the speakers connected to the
SPEAKERS B terminals and from the speakers of the power
amplifier connected to the PREOUT jacks.
Sefect the "Main Menu" icon from the fixed segments.
éSi
Ëîd gga ,0S, J3 g
i.stn ? Mo5e
'Isrt'di
F ncTs t r*K.J
• The menu screen shown in step H is displayed when the "Stp"
con IS selected from the "Main Menu".
Perform icon selection in the "Setup" menu.
LsnlSndf Fncii
Setup
Input ],
{ Surround
II
1 IR J(
Macro t
I Download |( Mufti Room |
1 Back Light 1
f-
O Select the "Multi Room" icon in the "Setup" menu.
Perform setup.
Setup Multi Room
[ Multi Room
W
Yes
1 Zone Select II
Room B
DISPLAY MODE
> To control she desired com
ponents
from
another
room, be sure to set the
remote control unit to the
"Room B" control mode.
O Setup of the remote control unit.
Multi Room : Ves/No
...................Select "Yes" to use the system in both
"Room A" and "Room B".
Zone Select: Room A /Room B
...................Set according to your current location.
...................Select "Room A" if you are located in Room A.
...................Select "Room B" if you are iocated in Room B.
• While "Mutti Room" is set to "Yes", part of the system control
operation, which is a "Sl.16" function, is not available
© Setup of the main unit.
Press and hold the DISPLAY MODE key for more than 2
seconds to set the iR RECEIVER setup to "IR RECEIVER B",
• To control components from
"Room B"....
Sea the description of
"Remote control of audio in another
room (Room Bi”
• When "Zone Select" is setto "Room B". only the "Setup" menu
can be selected from the "Main Menu" screen.