Turning the power on for the first time, Switching the display mode (display mode key), Switching the ir receiver mode (display mode key) – Kenwood KRF-V8881 D User Manual
Page 15: Ir receiver setting, Turning the power on far the first time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VR-5090/VR-EOBO/KRF-V8881D/KRF-V7771D (En/K]
Turning the power on for the first time
O Check that all of the connections have been made properly.
& Plug the power cord into an AC wall outlet.
©Push the Power key on the front panel. (Except for U.S. A., U.S.
Military and Canada)
O Press the ON/STAWDBY key on the front panel.
Switching the display mode (DISPLAY MODE key)
Use the following procedure to switch the mode of the main unit display.
O Press the DISPLAY MODE key,
Each press switches the mode as follows.
-► Connected component, analog/digital displays Input and connected component name display-* Listen mode display-
(Example)
¡Example)
(Example)
DVD DGTL
VIDEOS ; DVD
DOLBY DIGITAL
(VIDEOS DGTL)
(VIDEOS :
)
The display inside ( j is shown when she connected component name rs not assigned.
Switching the IR RECEIVER mode (DISPLAY MODE key)
Use the following procedure to switch the !R remote control signal sensor (transmitter) in use between the transmitter on
the main unit and the IR RECEIVER.
O Press and hold the DISPLAY MODE key for more than 2 seconds.
Each holding switches the mode as follows, IPossible with the VR-209S)
~* IR RECEIVER OFF -* IR RECEIVER 8 -* IR RECEIVER A -►
In case the multi-room function is not provided (i.e. except for the VR-2090)
-* IR RECEIVER OFF -* IR RECEIVER ON -*
IR RECEIVER setting
The following table shows the IR RECEIVER setting and the status of associated functions.
IR RECEIVER Setting
IR RECEIVER OFF
(Common setting for all
models)
IB RECEIVER B
(Possible
With
tha VR-2090)
IR RECEIVER A
(Possible with
the VR-2090)
IR RECEIVER ON
(Possible with other
models than VR-2090)
Purpose
Do not use
the IR RECEIVER.
Enables the "Room A"
and "Room B" setting.
Use the IR RECEIVER in
"Room A".
Use the IR RECEIVER,
Main Unit
sensor/ transmitter
Use the main unit
sensor/ transmitter
Use the main unit
sensor/ transmitter in
"Room A".
Disables the main unit
sensor/ transmitter.
Disables the main unit
sensor/ transmitter.
IR RECEIVER'S
sensor (transmitter)
Disables the use.
Uses the IR RECEIVER'S
sensor
(transmitter)
In
"Room B".
Uses the IR RECEIVER'S
sensor (transmitter).
Uses the IR RECEIVER'S
sensor (transmitter).