Cisco OL-21636-01 - Manual (Page 327)

A-49
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Appendix A Sample Configlets
FlexUNI/EVC (ATM-Ethernet Interworking, Local Core Connectivity, Multipoint Circuit)
FlexUNI/EVC (ATM-Ethernet Interworking, Local Core
Connectivity, Multipoint Circuit)
Configuration • FlexUNI(EVC)/ATM-Ethernet Interworking.
• Feature: FlexUNI/EVC for ATM-Ethernet interworking with local core connectivity for multiple
links that terminate on the same local N-PE. Link #1 terminates on an ATM interface, and link #2
terminates on an Ethernet interface.
• Device configuration:
– The N-PE 1 is a Cisco 7600 with IOS 12.2(33) SRB3.
Interface(s): ATM1/0/0.99, TenGigabitEthernet6/0/0, TenGigabitEthernet6/0/1.
Configlets
Comments • None.
N-PE 1 (ATM + Ethernet) N/A
!
vlan 1001
exit
!
interface ATM1/0/0.99 point-to-point
no atm enable-ilmi-trap
pvc 99/99
encapsulation aal5snap
bridge-domain 1001
!
!
interface TenGigabitEthernet6/0/0
no ip address
no mls qos trust
service instance 104 ethernet 1-4_60
encapsulation dot1q 11
rewrite ingress tag pop 1 symmetric
bridge-domain 1001
!
!
interface TenGigabitEthernet6/0/1
no ip address
no mls qos trust
service instance 105 ethernet 1-4_60
encapsulation dot1q 12
rewrite ingress tag pop 1 symmetric
bridge-domain 1001
!