Cisco OL-21636-01 - Manual (Page 324)

A-46
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Appendix A Sample Configlets
FlexUNI/EVC (ATM-Ethernet Interworking, Pseudowire Core Connectivity, Point-to-Point Circuit)
FlexUNI/EVC (ATM-Ethernet Interworking, Pseudowire Core
Connectivity, Point-to-Point Circuit)
Configuration • FlexUNI(EVC)/ATM-Ethernet Interworking.
• Feature: FlexUNI/EVC for ATM-Ethernet interworking with pseudowire core connectivity with an
end-to-end circuit with multiple links. One link terminates on an ATM interface on N-PE 1, and the
other link terminates on an Ethernet interface on N-PE 2.
• Device configuration:
– N-PE 1 is a Cisco 7600 with IOS 12.2(33) SRB3.
Interface(s): ATM1/0/0.370.
– N-PE 2 is a Cisco 7600 with IOS 12.2(33) SRE.
Interface(s): GigabitEthernet4/0/2.
Configlets
Comments • None.
N-PE 1 (ATM) N-PE 2 (Ethernet)
!
interface ATM1/0/0.370 point-to-point
no atm enable-ilmi-trap
pvc 0/370 l2transport
encapsulation aal5snap
xconnect 192.169.105.10 123 pw-class
inter-ether
!
!
ethernet evc 1-3_51
!
interface GigabitEthernet4/0/2
no ip address
no mls qos trust
service instance 103 ethernet 1-3_51
encapsulation dot1q 370
rewrite ingress tag pop 1 symmetric
xconnect 192.169.105.20 123 encapsulation
mpls
!