Cisco OL-21636-01 User Manual
Page 271
13-5
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Chapter 13 Generating L2 and VPLS Reports
L2 and VPLS Reports
•
AC1-CDP Drop Threshold—Cisco Discovery Protocol drop threshold (in packets/second) for the
first attachment circuit (AC1).
•
AC1-VTP Drop Threshold—VLAN Trunk Protocol drop threshold (in packets/second) for the first
attachment circuit (AC1).
•
AC1-UNI Recovery Interval—Recovery interval (in seconds) of the UNI port for the first
attachment circuit (AC1).
•
AC1-UNI Speed—UNI port speed for the first attachment circuit (AC1).
•
AC1-UNI Shutdown—Shutdown status of the UNI port for the first attachment circuit (AC1).
•
AC1-UNI PortSecurity—Status of UNI port security for the first attachment circuit (AC1).
•
AC1-UNI Duplex—Duplex status (none, full, half, or auto) of the UNI port for the first attachment
circuit (AC1).
•
AC1-Maximum MAC Address—Maximum MAC addresses allowed on the UNI port for the first
attachment circuit (AC1).
•
AC1-UNI Aging—Length of time, in seconds, that MAC addresses can stay in the UNI port security
table for the first attachment circuit (AC1).
•
AC2-ID—Second attachment circuit (AC2) identification number.
•
AC2-UNI Device Interface—UNI device interface of the second attachment circuit (AC2).
•
AC2-NPC—Named physical circuit for the second attachment circuit (AC2).
•
AC2-VLAN ID/DLCI/VCD—The VLAN ID, DLCI or VCD of the second attachment circuit
(AC2).
•
AC2-VPI—Virtual path identifier for the first attachment circuit (AC2).
•
AC2-VCI—Virtual channel identifier for the first attachment circuit (AC2).
•
AC2-Interface Encap Type—Encapsulation type used for the second attachment circuit (AC2).
•
AC2-AccessDomain—Access domain name for the second attachment circuit (AC2).
•
AC2-Customer Facing UNI—Customer-facing UNI port of the second attachment circuit (AC2).
•
AC2-Loopback IP Address—Loop back address for the second attachment circuit (AC2).
•
AC2-STP Shutdown Threshold—Spanning Tree Protocol shutdown threshold for the second
attachment circuit (AC2).
•
AC2-VTP Shutdown Threshold—VLAN Trunk Protocol shutdown threshold for the second
attachment circuit (AC2).
•
AC2-CDP Shutdown Threshold—Cisco Discovery Protocol shutdown threshold for the second
attachment circuit (AC2).
•
AC2-STP Drop Threshold—Spanning Tree Protocol drop threshold for the second attachment
circuit (AC2).
•
AC2-CDP Drop Threshold—Cisco Discovery Protocol drop threshold for the second attachment
circuit.
•
AC2-VTP Drop Threshold—VLAN Trunk Protocol drop threshold for the second attachment
circuit (AC2).
•
AC2-UNI Recovery Interval—Recovery interval of the UNI port for the second attachment circuit
(AC2).
•
AC2-UNI Speed—UNI port speed for the second attachment circuit (AC2).
•
AC2-UNI Shutdown—Shutdown status of the UNI port for the second attachment circuit (AC2).