Cub Cadet Z-Force S Series - Manual (Page 76)

Z-Force-S
70
10. Install the hex screw with a lock washer and the
fender washer. See Figure 6.75.
11. Tighten the hex screw holding the yoke to a torque
of 31 ft lbs (42 Nm).
12. Install the yoke cover.
13. Install the front wheel by following the procedures
described in the front wheel section of the chapter.
14. Test drive the riding mower in a safe area before
returning it to service.
Figure 6.75
Hex screw