Kontron S4600 SEL Troubleshooting - Manual (Page 72)

Processor Subsystem
System Event Log Troubleshooting Guide for EPSD Platforms Based on Intel ® Xeon ® Processor E5 4600/2600/2400/1600/1400 Product Families
62 Intel order number G90620-002 Revision 1.1
ED2 Description Next Steps
01h CATERR
This error is typically caused by other platform components.
1. Check for other errors near the time of the CATERR event.
2. Verify all peripherals are plugged in and operating correctly, particularly Hard Drives, Optical Drives,
and I/O.
3. Update system firmware and drivers.
2h
CPU Core
Error 1. Cross test the processors.
2. Replace the processors depending on the results of the test.
3h
MSID
Mismatch Verify the processor is supported by your baseboard. Check your boards Technical Product Specification
(TPS).
6.3 CPU Missing Sensor
The CPU Missing sensor is a discrete sensor reporting the processor is not installed. The most common instance of this event is due
to a processor populated in the incorrect socket.
Table 51: CPU Missing Sensor Typical Characteristics
Byte Field Description
11 Sensor Type 07h = Processor
12 Sensor Number 82h
13 Event Direction and
Event Type [7] Event direction
0b = Assertion Event
1b = Deassertion Event
[6:0] Event Type = 6Fh (Sensor Specific)
14 Event Data 1 [7:6] – 00b = Unspecified Event Data 2
[5:4] – 00b = Unspecified Event Data 3
[3:0] – Event Trigger Offset = 1h (State Asserted)
15 Event Data 2 Not used
16 Event Data 3 Not used