AVer EH11116H-4 series user manual User Manual
Page 99
89
CHAPTER 3
Name
Function
(12) Full screen
View in full screen mode. To return, press the right button of the mouse or ESC on the
keyboard or click the arrow icon.
Click to exit from
full screen mode
When you switch to full screen in multiple-screen mode, Left click to toggle to only display
one of the video in the multiple-screen mode or all.
(13) Visual Search
Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second(see also
(14) Find Next
Search for the next event or changes in the motion detector frame. You can use this when you
are using Intelligent Search or Event Search function.
(15) Event Search
Search from the recorded activities that were recorded in event log (i.e., Sensor, Motion,
Video Loss). (See also
(16) Intelligent Search
Search the changes in the motion detector frame (See also
(17) Audio
Enable/disable volume
(18) De-interlace
To enhance the video quality. Set the de-interlace mode to #1, if you are capturing motionless
picture and select #2, if it captures lots of movement.
(19) Watermark
To verify the output video segment has not been modified. Click
to check the video.
Watermark verification windows will show up as following:
Green light: Pass the watermark verification.
Red light: Fail the watermark verification or this video doesn
’t have watermark
embedded.
i
Watermark verification doesn
’t support the video that is recorded from IP camera.