AVer EH11116H-4 series user manual - Manual (Page 122)

112
4.1.4 To Setup Remote System Setting
The setting here applies to Remote DVR only. Select function to configure.
4.1.4.1 System Setting
In the System Setting windows, click Update to accept the new settings, click Exit to exit without saving, and
click Default to revert back to original factory setting.
(1) Delete recorded data after
If you want the system to automatically erase the data after a certain days, enable the Delete recorded data
after check box and enter the numbers of days in Days text box.
(2) Delete event and alarm log after
If you want the system to automatically erase the event and alarm log files after a certain days, enable the
Delete event and alarm log after check box and enter the numbers of days in Days text box.
(3) Overwrite Enable
When there is not enough free space to record one hour data, the system automatically replaces the oldest
data.
(4) Configuration
Backup a copy of all the settings and allows you to regain the same settings back. To save the current settings,
click Export. To replace the settings with the one you have saved, click Import.