AVer EH11116H-4 series user manual User Manual
Page 109
99
CHAPTER 3
- Send E-mail
Send an electronic text message. Beside the Send Email check box, click Detail.
In the E-mail Setting dialog box, click OK to exit and save the setting and Cancel to exit without saving
the setting.
(1) Mail Server
Enter the SMTP Server and port. If your e-mail system requires user identification, enable
Authentication check box and enter ID and Password.
(2) Mail
Fill the mailing information. Click Test Account button can exam the mail is workable or not.
From: Enter the sender e-mail address.
To and CC: Enter the recipient email address and separate it with comma or a semicolon (;).
Subject: Enter the message title.
Message: Type the message.
Notice Interval: Set a time gap for mail re-sending when mail has failed to send.
(3) Snapshot
When send out the email, the DVR system will snapshot image of the selected camera channel.
Select Camera: Select the channel that will be snapshot when alarm email is sending out.
Video Size: Select the size of video that will be taken when snapshot. Auto means default size
that chosen by DVR system.