AVer EH11116H-4 series user manual - Manual (Page 14)

4
1.2.2 EH1116H-4 Nano
+
Name Function
(1) System Power
indicator
System power status indicators. Indicate running state of system. Lights when the system is
running.
(2) Record indicator When DVR system is recording, the light will keep flashing.
(3) IR Sensor Receive signal from the remote control to operate the DVR unit
(4) IR Sensor port For extended IR sensor cable(optional)
(5) USB port(mouse) For USB mouse connection.
(6) USB port
For connecting USB device, ex: USB pen drive, exte rnal hard disk, mouse…and so on.
i
The USB storage device must be in FAT32 format.
(7) Switch to playback mode. Press again can switch back to preview mode.
(8) Start to recording.
(9) To call out setup menu.
(10) Press it to enter or make a selection.
(11)
Temporarily freeze the video playback.
Stop video playback. When user press stop button, the DVR will switch
back to preview mode.
Wind back the playback video.
Fast play the video playback at the speed of 2x, 4x, 8x,16x, 32x, or 64x.
To play the recorded video.