AVer EH11116H-4 series user manual - Manual (Page 73)

63
CHAPTER 3
3.2.2 To Setup IP Camera(Flexible Mode)
The Flexible Mode is selected in IP Camera Resolution Mode of System Setting. In Flexible mode, the
Camera Setting interface is displayed the IP camera channel
’s resolution value that has been calculated and
transform by DVR system. In Flexible Mode, DVR system can supports up to 8MP for 4 IP camera channels
that includes IP camera and Remote DVR camera channel (in any code type – H.264, MPEG4, MPEG). A
channel maximum supported value is 5MP. Click Default will back to the factory default value.
i - EH1116H-4 series only support first 4 channels (CH1~4) for IP camera.
- Up to 5 megapixels for one channel, and a total of 8 megapixels for all 4 IP camera channels in
H.264/MPEG4/MJPEG format
(1) Camera Icons
Select the camera number you want to view. To enable/disable all cameras, click ALL check box.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest disabling
it so that the syst em won’t detect it as video loss error.
(3) Input
Select the camera type as IP Camera.
(4) Camera
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can still record
the video and preview it in playback mode.
- Enable Audio
The IP camera channel is not supported.
- Name
Change the camera name
- Description
Add a short comment