AVer EH11116H-4 series user manual - Manual (Page 111)

101
CHAPTER 3
- PTZ preset point
Position the PTZ camera based on the preset point setting. Beside
the PTZ preset point check box, click Detail. In the Trigger PTZ
Preset Setting dialog box, select the PTZ camera number then
select the Enable check box. Select the position of the PTZ
camera when the alarm is activated and ended. For the PTZ
camera end point, user can also select on preset position or Auto
Pan between preset position groups.
- Send to CMS (Central Management System)
Enable/disable the selected camera to send video
to CMS when the alarm is activated.
Beside the Send to CMS check box, click Detail. In
the CMS Setting, select the camera to
enable/disable sending the video to CMS. Enable
All to select all cameras. Then, click OK to accept
the new settings and Cancel to exit without saving.