AVer EH11116H-4 series user manual - Manual (Page 92)

82
- UPnP
This function is working when the router had enabled the UPNP function and had opened the port, which
had assigned for UPNP setting, for the DVR system.
- Enable White List
i
Without any IP/IP range is assigned in White List table, none of IP address/IP range is allowed to access
DVR when White List function is enabled.
An access permit list for the remote accessing of DVR server. Enter the IP address and click Add. Or,
enter a range of IP address and click Add. To delete the IP from the list, select the IP and click Delete
button. To reset the input, click Clear button.
- Network Bandwidth Limit
By Channel: Set the network bandwidth by each channel.
All: Set the total network bandwidth consumption limit.